CUBE 10M

• Applicable to air conditioners below 30.000 B.T.U
• Max Discharge Head: 10M
• Power Supply / Frequency: 100V – 240V 50/60 Hz
• Power Consumption (Max): 3W
• Dimensions: (L)14.6 x (W) 8.6 x 12 cm
• Discharge Pipe Size : Ø 4.3 x 6.5 mm
• Ambient Temperature Range:0 – 50。C Max
• Material: ABS
• Weight: 0.6 kg
• Standard: CE-ISO 9002:2008

Advantages:

• Intelligent control water head, not influenced by voltage,frequence, applicable to all power supply/ frequence: 100-240v,50/60 Hz
• The function of check valve design, to prevent cooling condensed water setback from inside of drainage pipe, no limit to even hight or low water discharging

Warning:

• Please check the power source is connecting with uninterruprible power source

Installing:

• Power installation type one: connect both condensate pump and air conditioner’s power cord and plug in power supply to power source
• Power installation type two: connect both condensate pump and air conditioner’s power cord and plug in power supply to power source

A. Suggest placing condensate pump on left or right below air condition with 15cm space in between, and use tool to frill two holes on the wall
B. Use the screws from the package and screw the hanger board with the plastic screw heads to a fixed condition
C. Place condensate pump’s back support hole to hanger board and keep condensate pump in an even horizontal level. Attention: Hanger board must be place correctly to condensate pump’s back support hole.
D. To avoid clog or malfunction, do not tie too tight on the belt or strip when fixed tubes on the wall, in order to have siphon reaction outlet discharging tube must be lower than condendsate pump 30 cm
E. Connect the condensate power cord and pour water into water inlet for testing. After making sure the pump is running functionally, place air conditioner’s outlet pipe to condensate pump’s water inlet hole to finish installation